There are no products in your shopping cart.
This 13-watt slimline fluorescent fixture is perfect for lighting workstations, or wherever low heat lighting is needed. Mounted simply by the two mounting clips, which are screwed directly to the under side of the panel. Comes standard with a simple on-off rocker switch. The fixture comes with a 10 foot power cord and is designed to be connected with jumpers to multiple fixtures. This fixture may also have a model number like SL-513.
22"(L) x 1-1/4"(W) x 1-9/16"(H)
FC-890 1" JUMPER CORD
A TWO POWER OUTLET UNIT WITH HIGH SPEED DATA CONNECTION AND USB JACK. THE USB JACK HAS AN ADDITIONAL POWER CORD (10 FEET) TO PLUG INTO THE WALL TO MAKE IT A CHARGING USB JACK. THE TRANSFORMER IS 2.1 AMPS SO IT WILL CHARGE YOUR iPAD. DATA JACK IS CAT5E AND HAS A 14 FOOT CORD TO CONNECT TO YOUR DATA SOURCE. THE UNIT HAS A 10 FOOT 14 GAUGE POWER CORD SUITABLE FOR COMMERCIAL OR RESIDENTIAL USE.$61.80
A 10 FOOT HDMI MALE TO MALE SUPPLY CORD. THIS CORD WILL MATCH UP WITH OUR HDMI JACKS TO CONNECT TO SEVERAL OF OUR DOMESTIC MADE POWER SUPPLIES.$13.93
THE USB CORD IS 10 FEET LONG WITH A TO B TYPE CONNECTIONS. CONNECT IT TO OUR FC-TRANS-USB TO POWER A PASS THROUGH USB PORT.
THE FC-236 IS A SHORTER VERSION OF THE FC-235 WITH A 7.5 WATT FROSTED INCANDESCENT LIGHT BULB. IT HAS A 30" MALE "T" BLADE WIRE TO CONNECT TO ANY OF OUR SWITCHES.
On/off Push Switch 1 lead (FC-500)
Touch Dimmer (FC-505),
3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
Low Profile Touch Dimmer (FC-507)
300 watt Full Range Rotary Dimmer (FC-510)
TUBE LIGHT WITH CURVED METAL REFLECTOR. INCLUDES A 10 FOOT POWER CORD AND 25 WATT INCANDESCENT LIGHT BULB. METAL BRACKET AT BASE OF LIGHT BULB HAS SCREW HOLES TO MOUNT THE FIXTURE.$12.36
THIS RECESSED MOUNTED POWER SUPPLY HAS 2 ELECTRICAL RECEPTACLES RATED FOR 12 AMPS. COMES WITH A 10 FOOT 14-3 GAUGE POWER CORD FOR COMMERCIAL PROPERTIES. THE POWER SUPPLY ALSO COMES WITH A 2.1 AMP CHARGING USB PORT THAT DOES REQUIRE AN ADDITIONAL OUTLET FOR THE TRANSFORMER TO BE PLUGGED INTO AT THE WALL.$52.53
THE FC-511 IS A ROTARY DIMMER DESIGNED FOR LED LIGHT FIXTURE SUCH AS THE FC-492, FC-493 AND THE FC-498. THIS DIMMER COMES WITH A 24 WATT TRANSFORMER THAT WILL CONTROL UP TO 8 FIXTURES. THE END CONNECTION WILL CONNECT DIRECTLY TO ANY OF THE FIXTURES LISTED ABOVE.$37.67
The FC-508 is a 3 stage touch dimmer/ driver (low. med, high), which has one 12” female touch lead
and one 12” LED female connector used to link 8 lights in a series. Standard 10 ft power cord.
Use FC-880 and FC-881 touch leads with this unit.
The FC-508 can be used to control Furnlite LED lights FC-498-BK, FC-492-BK, FC-493-BK.
This is a 24 watt capacity rated dimmer/driver.
Furnlite LED Puck lights provide an even warm light.
These LED lights provide adequate illumination for
any work surface or display, all while consuming less
energy than their halogen equivalent. They provide
task or accent illumination for indoor applications.
These LED lights can be surface mounted or recessed.
Surface mounting is achieved with the included mounting
ring and recessed mounting with the pressure clips
provided on the puck light.
• Furnlite LED Puck Light- 2 watt, single or double leads
that remains cool to the touch during operation