FC-111 3-3/4" Tall 3-1/4" Diameter Canister with "T"-Blade Connector

Fixture has two louvered vents and houses a 50 watt halogen bulb with a standard medium base. This canister is constructed of drawn steel, 3-1/4" diameter with a black power coated finish. Adjustable plastic mounting ring is mounted 3/4" up. An installation hole of 3-3/8" diameter is required. Fixture is to be installed from the top and is secured with three screws through the mounting ring. The wire exit the the top of the canister and is secured with 90-degree bushing. Each fixture can be connected directly to a switch or to another fixture using the 30" male cord. Select from any switch shown in the "Light Controls" section.

Wire Color: Black

Bulb: 50PAR20 (FC-910) Preinstalled

Finish: Black

Also the only color choice is the Snap-In Flanges
FC-120 Black
FC-121 White
FC-122 Brushed Brass
FC-123 Brushed Nickel

Switch options:

On/off Push Switch 1 lead (FC-500)
On/off (FC-504)
Touch Dimmer (FC-505),
3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
Low Profile Touch Dimmer (FC-507)
300 watt Full Range Rotary Dimmer (FC-510)
300 watt High/Low Dimmer (FC-515)
Roll Switch (FC-520)
Paddle Switch -Normally ON (FC-540)
Paddle Switch -Normally OFF (FC-541)
Rocker Switch (FC-542)

Need to Select a Touch Lead for FC-504, FC-505, FC-505-3, FC-507
(either Ring or Tinned end):

Ring Terminal Options:

24” Ring Terminal (FC-880-24)
48” Ring Terminal (FC-880-48)
84” Ring Terminal (FC-880-84)
48” Double Ring Terminal (FC-8800-48)
84” Double Ring Terminal (FC-880-84)
84” Ring Terminal (FC-880-84)

Tinned End Options:
24” Tinned End (FC-881-24)
84” Tinned End (FC-881-84)

Need to Select a Touch Button or Plate for FC-504, FC-505, FC-505-3, FC-507

Touch Button Options:
FC-883

Touch Plate Option:
2 x 2 Brass Plate (FC-886)
90-degree Touch Plate (FC-888)