FC-100 2-7/8" Tall 3-1/4" Diameter Canister with "T"-Blade Connectors

SKU: FC-100
Light up Your space
This fixture has two louvered vents and houses a 40-watt incandescent bulb with a standard medium base. The canister is constructed of drawn steel, 3-1/4" diameter with a black powder-coated finish. An adjustable plastic mounting ring is mounted 3/4" up. Installation hole of 3-3/8" diameter is required. The fixture is to be installed from the top and is secured with three screws through the mounting ring. The wires exit the top of the canister and are secured with 90-degree bushings. Each fixture can be connected in a series of up to six lights using a 30" male, and the 30" female non-typical "T"-blade connectors. Select from any switch in the "Light Controls" section. This fixture is also sometimes called GR3290P-F.
• Bulb: 40R14 (FC-900) Preinstalled

Note: This item does not plug directly into the wall. You will need to select a switch from below to plug into the wall.nb
FC-120 Black snap in flange
FC-121 White snap in flange
FC-122 Brushed Brass
FC-123 Brushed Nickel
Switch Options
On/off Push Switch 1 lead (FC-500)
On/off (FC-504)
Touch Dimmer (FC-505),
3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
Low Profile Touch Dimmer (FC-507)
300 watts Full Range Rotary Dimmer (FC-510)
300 watts High/Low Dimmer (FC-515)
Roll Switch (FC-520)
Paddle Switch -Normally ON (FC-540)
Paddle Switch -Normally OFF (FC-541)
Rocker Switch (FC-542)

Ring Terminal Options
24” Ring Terminal (FC-880-24)
48” Ring Terminal (FC-880-48)
84” Ring Terminal (FC-880-84)
48” Double Ring Terminal (FC-8800-48)
84” Double Ring Terminal (FC-8800-84)
84” Ring Terminal (FC-880-84)

Tinned End Options
24” Tinned End (FC-881-24)
84” Tinned End (FC-881-84)

Touch Button Options

Touch Plate Options
2 x 2 Brass Plate (FC-886)
90-degree Touch Plate (FC-888)
Latest catalog: