FC-111 3-3/4" Tall 3-1/4" Diameter Canister with "T"-Blade Connector

$17.52
SKU: FC-111
Light up Your space
This fixture has two louvered vents and houses a 50-watt halogen bulb with a standard medium base. This canister is constructed of drawn steel, 3-1/4" diameter with a black powder-coated finish. An adjustable plastic mounting ring is mounted 3/4" up. An installation hole of 3-3/8" diameter is required. The fixture is to be installed from the top and is secured with three screws through the mounting ring. The wire exit the top of the canister and is secured with 90-degree bushing. Each fixture can be connected directly to a switch or to another fixture (FC-110) using the 30" male cord. Select from any switch shown in the "Light Controls" section. This fixture is the end fixture in a series and must be connected to the FC-110 to be used with additional light fixtures.

Features
• Bulb: 50PAR20 (FC-910) Preinstalled

Note: This item does not plug directly into the wall. You will need to select a switch from below to plug into the wall. Select a Touch Lead for products FC-504, FC-505, FC-505-3, FC-507 (either Ring or Tinned end). Select a Touch Button or Plate for products FC-504, FC-505, FC-505-3, FC-507.

Snap-In Flanges Options
FC-120 Black
FC-121 White
FC-122 Brushed Brass
FC-123 Brushed Nickel
 
Switch options
On/off Push Switch 1 lead (FC-500)
On/off (FC-504)
Touch Dimmer (FC-505),
3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
Low Profile Touch Dimmer (FC-507)
300 watts Full Range Rotary Dimmer (FC-510)
300 watts High/Low Dimmer (FC-515)
Roll Switch (FC-520)
Paddle Switch -Normally ON (FC-540)
Paddle Switch -Normally OFF (FC-541)
Rocker Switch (FC-542)

Ring Terminal Options
24” Ring Terminal (FC-880-24)
48” Ring Terminal (FC-880-48)
84” Ring Terminal (FC-880-84)
48” Double Ring Terminal (FC-8800-48)
84” Double Ring Terminal (FC-8800-84)
84” Ring Terminal (FC-880-84)

Tinned End Options
24” Tinned End (FC-881-24)
84” Tinned End (FC-881-84)

Touch Button Options
FC-883

Touch Plate Options
2 x 2 Brass Plate (FC-886)
90-degree Touch Plate (FC-888)
 
Size: 
3-3/4"
Product Resources: 
Clearance/Sale: 
No