Light up Your Space
Each puck light is made of PVC plastic with one male and one female connector plug. This puck light is a 120 volt light fixture with a 25-watt halogen bulb. It can be surface mounted or it can be installed in a cutout in the top panel of the cabinet. The diameter of the cutout is 3.375-inches. Fixtures can be connected in a series of up to six lights using the 30-inch male and the 30-inch female non-typical “T”-blade connectors. Select from any switch shown in the “Light Controls” section for power control.

Dimensions
• Product Dimensions: 1.5” x 3.25”

Note: Select a Touch Lead for products FC-504, FC-505, FC-505-3, FC-507 (either Ring or Tinned end). Must also select a Touch Button or Plate for products FC-504, FC-505, FC-505-3, and FC-507.

Switch Options
• On/off Push Switch 1 lead (FC-500)
• On/off (FC-504)
• Touch Dimmer (FC-505),
• 3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
• Low Profile Touch Dimmer (FC-507)
• 300 watts Full Range Rotary Dimmer (FC-510)
• 300 watts High/Low Dimmer (FC-515)
• Roll Switch (FC-520)
• Paddle Switch -Normally ON (FC-540)
• Paddle Switch -Normally OFF (FC-541)
• Rocker Switch (FC-542)

Ring Terminal Options
• 24” Ring Terminal (FC-880-24)
• 48” Ring Terminal (FC-880-48)
• 84” Ring Terminal (FC-880-84)
• 48” Double Ring Terminal (FC-8800-48)
• 84” Double Ring Terminal (FC-880-84)
• 84” Ring Terminal (FC-880-84)

Tinned End Options
• 24” Tinned End (FC-881-24)
• 84” Tinned End (FC-881-84)

Touch Button Options
• FC-883

Touch Plate Options
• 2 x 2 Brass Plate (FC-886)
• 90-degree Touch Plate (FC-888)