Light up Your space
This fixture has two louvered vents and houses a 50-watt halogen bulb with a standard medium base. The canister is constructed of drawn steel, 3-1/4" diameter with a black powder-coated finish. The adjustable plastic mounting ring is mounted 0.75-inches up to secure fixture to wood. It also has welded beveled flange to cover the hole for a more beautifying look. An installation hole of 3.375-inch diameter is required. The fixture is to be installed from the bottom and is secured with three screws through the mounting ring. The wires exit the top of the canister and are secured with 90 degree bushings. Each fixture can be connected directly to the wall or to a switch with the 30-inch male connector. Select from any switch in the "Light Controls" section.

Features
• Bulb: 50PAR20 (FC-910) Preinstalled

Note: This item can plug directly into the wall, or choose from the switch options listed below. You will need to select a switch from below to plug into the wall. Select a Touch Lead for products FC-504, FC-505, FC-505-3, FC-507 (either Ring or Tinned end). Select a Touch Button or Plate for products FC-504, FC-505, FC-505-3, FC-507.
 
Switch options
• On/off Push Switch 1 lead (FC-500)
• On/off (FC-504)
• Touch Dimmer (FC-505),
• 3 Stage Touch Dimmer with T-blade connectors (FC-505-3)
• Low Profile Touch Dimmer (FC-507)
• 300 watts Full Range Rotary Dimmer (FC-510)
• 300 watts High/Low Dimmer (FC-515)
• Roll Switch (FC-520)
• Paddle Switch -Normally ON (FC-540)
• Paddle Switch -Normally OFF (FC-541)
• Rocker Switch (FC-542)

Ring Terminal Options
• 24” Ring Terminal (FC-880-24)
• 48” Ring Terminal (FC-880-48)
• 84” Ring Terminal (FC-880-84)
• 48” Double Ring Terminal (FC-8800-48)
• 84” Double Ring Terminal (FC-8800-84)
• 84” Ring Terminal (FC-880-84)

Tinned End Options
• 24” Tinned End (FC-881-24)
• 84” Tinned End (FC-881-84)

Touch Button Options
• FC-883

Touch Plate Options
• 2 x 2 Brass Plate (FC-886)
• 90-degree Touch Plate (FC-888)